isdir.f

      INTEGER FUNCTION ISDIR (N, B, X, NELT, IA, JA, A, ISYM, MSOLVE,
     +   ITOL, TOL, ITMAX, ITER, ERR, IERR, IUNIT, R, Z, DZ, RWORK,
     +   IWORK, BNRM, SOLNRM)
C***BEGIN PROLOGUE  ISDIR
....
....
Warning:   this routine is not intended to be user-callable.
....
....
C***SUBSIDIARY
C***PURPOSE  Preconditioned Iterative Refinement Stop Test.
C            This routine calculates the stop test for the iterative
C            refinement iteration scheme.  It returns a non-zero if the
C            error estimate (the type of which is determined by ITOL)
C            is less than the user specified tolerance TOL.
C***LIBRARY   SLATEC (SLAP)
C***CATEGORY  D2A4, D2B4
C***TYPE      DOUBLE PRECISION (ISSIR-S, ISDIR-D)
C***KEYWORDS  LINEAR SYSTEM, SLAP, SPARSE, STOP TEST
C***AUTHOR  Greenbaum, Anne, (Courant Institute)
C           Seager, Mark K., (LLNL)
C             Lawrence Livermore National Laboratory
C             PO BOX 808, L-60
C             Livermore, CA 94550 (510) 423-3141
C             seager@llnl.gov
C***DESCRIPTION
C
C *Usage:
C     INTEGER N, NELT, IA(NELT), JA(NELT), ISYM, ITOL, ITMAX, ITER
C     INTEGER IERR, IUNIT, IWORK(USER DEFINED)
C     DOUBLE PRECISION B(N), X(N), A(N), TOL, ERR, R(N), Z(N), DZ(N)
C     DOUBLE PRECISION RWORK(USER DEFINED), BNRM, SOLNRM
C     EXTERNAL MSOLVE
C
C     IF( ISDIR(N, B, X, NELT, IA, JA, A, ISYM, MSOLVE, ITOL, TOL,
C    $     ITMAX, ITER, ERR, IERR, IUNIT, R, Z, DZ, RWORK, IWORK,
C    $     BNRM, SOLNRM) .NE. 0 ) THEN ITERATION DONE
C
C *Arguments:
C N      :IN       Integer.
C         Order of the Matrix.
C B      :IN       Double Precision B(N).
C         Right-hand side vector.
C X      :IN       Double Precision X(N).
C         The current approximate solution vector.
C NELT   :IN       Integer.
C         Number of Non-Zeros stored in A.
C IA     :IN       Integer IA(NELT).
C JA     :IN       Integer JA(NELT).
C A      :IN       Double Precision A(NELT).
C         These arrays contain the matrix data structure for A.
C         It could take any form.  See "C *Description" in the
C         DIR routine.
C ISYM   :IN       Integer.
C         Flag to indicate symmetric storage format.
C         If ISYM=0, all non-zero entries of the matrix are stored.
C         If ISYM=1, the matrix is symmetric, and only the upper
C         or lower triangle of the matrix is stored.
C MSOLVE :EXT      External.
C         Name of a routine which solves a linear system Mz = r for
C         z given r with the preconditioning matrix M (M is supplied via
C         RWORK and IWORK arrays.  The name of the MSOLVE routine must
C         be declared external in the calling program.  The calling
C         sequence to MSOLVE is:
C             CALL MSOLVE(N, R, Z, NELT, IA, JA, A, ISYM, RWORK, IWORK)
C         Where N is the number of unknowns, R is the right-hand side
C         vector and Z is the solution upon return.  NELT, IA, JA, A and
C         ISYM are defined as above.  RWORK is a double precision array
C         that can be used to pass necessary preconditioning information
C         and/or workspace to MSOLVE.  IWORK is an integer work array
C         for the same purpose as RWORK.
C ITOL   :IN       Integer.
C         Flag to indicate type of convergence criterion.
C         If ITOL=1, iteration stops when the 2-norm of the residual
C         divided by the 2-norm of the right-hand side is less than TOL.
C         If ITOL=2, iteration stops when the 2-norm of M-inv times the
C         residual divided by the 2-norm of M-inv times the right hand
C         side is less than TOL, where M-inv is the inverse of the
C         diagonal of A.
C         ITOL=11 is often useful for checking and comparing different
C         routines.  For this case, the user must supply the "exact"
C         solution or a very accurate approximation (one with an error
C         much less than TOL) through a common block,
C             COMMON /DSLBLK/ SOLN( )
C         If ITOL=11, iteration stops when the 2-norm of the difference
C         between the iterative approximation and the user-supplied
C         solution divided by the 2-norm of the user-supplied solution
C         is less than TOL.  Note that this requires the user to set up
C         the "COMMON /DSLBLK/ SOLN(LENGTH)" in the calling routine.
C         The routine with this declaration should be loaded before the
C         stop test so that the correct length is used by the loader.
C         This procedure is not standard Fortran and may not work
C         correctly on your system (although it has worked on every
C         system the authors have tried).  If ITOL is not 11 then this
C         common block is indeed standard Fortran.
C TOL    :IN       Double Precision.
C         Convergence criterion, as described above.
C ITMAX  :IN       Integer.
C         Maximum number of iterations.
C ITER   :IN       Integer.
C         Current iteration count.  (Must be zero on first call.)
C ERR    :OUT      Double Precision.
C         Error estimate of error in the X(N) approximate solution, as
C         defined by ITOL.
C IERR   :OUT      Integer.
C         Error flag.  IERR is set to 3 if ITOL is not one of the
C         acceptable values, see above.
C IUNIT  :IN       Integer.
C         Unit number on which to write the error at each iteration,
C         if this is desired for monitoring convergence.  If unit
C         number is 0, no writing will occur.
C R      :IN       Double Precision R(N).
C         The residual R = B-AX.
C Z      :WORK     Double Precision Z(N).
C         Workspace used to hold the pseudo-residual M z = r.
C DZ     :WORK     Double Precision DZ(N).
C         Workspace used to hold temporary vector(s).
C RWORK  :WORK     Double Precision RWORK(USER DEFINED).
C         Double Precision array that can be used by  MSOLVE.
C IWORK  :WORK     Integer IWORK(USER DEFINED).
C         Integer array that can be used by MSOLVE.
C BNRM   :INOUT    Double Precision.
C         Norm of the right hand side.  Type of norm depends on ITOL.
C         Calculated only on the first call.
C SOLNRM :INOUT    Double Precision.
C         2-Norm of the true solution, SOLN.  Only computed and used
C         if ITOL = 11.
C
C *Function Return Values:
C       0 : Error estimate (determined by ITOL) is *NOT* less than the
C           specified tolerance, TOL.  The iteration must continue.
C       1 : Error estimate (determined by ITOL) is less than the
C           specified tolerance, TOL.  The iteration can be considered
C           complete.
C
C *Cautions:
C     This routine will attempt to write to the Fortran logical output
C     unit IUNIT, if IUNIT .ne. 0.  Thus, the user must make sure that
C     this logical unit is attached to a file or terminal before calling
C     this routine with a non-zero value for IUNIT.  This routine does
C     not check for the validity of a non-zero IUNIT unit number.
C
C***SEE ALSO  DIR, DSJAC, DSGS
C***ROUTINES CALLED  D1MACH, DNRM2
C***COMMON BLOCKS    DSLBLK
C***REVISION HISTORY  (YYMMDD)
C   871119  DATE WRITTEN
C   880320  Previous REVISION DATE
C   890915  Made changes requested at July 1989 CML Meeting.  (MKS)
C   890922  Numerous changes to prologue to make closer to SLATEC
C           standard.  (FNF)
C   890929  Numerous changes to reduce SP/DP differences.  (FNF)
C   891003  Removed C***REFER TO line, per MKS.
C   910411  Prologue converted to Version 4.0 format.  (BAB)
C   910502  Removed MSOLVE from ROUTINES CALLED list.  (FNF)
C   910506  Made subsidiary to DIR.  (FNF)
C   920407  COMMON BLOCK renamed DSLBLK.  (WRB)
C   920511  Added complete declaration section.  (WRB)
C   921026  Changed 1.0E10 to D1MACH(2) and corrected E to D in
C           output format.  (FNF)
C***END PROLOGUE  ISDIR