Documentation Contents
Java Platform, Standard Edition Deployment Guide
Contents Previous Next

21 Deployment Configuration File and Properties

This topic describes system and user properties that can be set to configure the deployment process.

The deployment.properties file is used for storing and retrieving deployment configuration properties shown in the Java Control Panel. The properties are also used for customizing runtime behavior for both Java Plug-in and Java Web Start.

This topic contains the following sections:

21.1 Deployment Configuration File (deployment.properties)

A user-level deployment.properties file always exists. Its location, which is non-configurable, is described in User Level. There can also be an optional system-level deployment.properties file. If it exists, its location is determined by a System Administrator through the deployment.config file, described in System Level.

21.1.1 User Level

The following table shows the location of the user-level deployment.properties file.

Table 21-1 Location of the User-Level Deployment Configuration File

Operating System Location

Windows

<User Application Data Folder>\LocalLow\Sun\Java\Deployment\deployment.properties

Solaris, Linux

${user.home}/.java/deployment/deployment.properties

OS X

~/Library/Application Support/Oracle/Java/Deployment/deployment.properties


On Windows, <User Application Data Folder> is typically C:\Users\username. On Solaris and Linux, ${user.home} is typically /home/username. On OS X, the tilde (~) represents the home directory, which is typically /Users/username.

The following locations provide examples for each operating system:

  • For user jsmith running on Windows 7, the deployment.properties file would be located in the following directory:

    C:\Users\jsmith\AppData\LocalLow\Sun\Java\Deployment\deployment.properties

  • For user bjones running on Solaris or Linux, the deployment.properties file would be located in the following directory:

    /home/bjones/.java/deployment/deployment.properties

  • For user jdoe running on OS X, the deployment.properties file would be located in the following directory:

    /Users/jdoe/Library/Application Support/Oracle/Java/Deployment/deployment.properties

21.1.2 System Level

The deployment.config file is used for specifying the system-level deployment.properties in the infrastructure. By default no deployment.config file exists, so no system-wide deployment.properties file exists. If the deployment.config file exists, it is located in one of the directories shown in the following table.

Table 21-2 Location of the System-Level Deployment Configuration File

Operating System Location

Windows

  • <Windows Directory>\Sun\Java\Deployment\deployment.config

  • ${deployment.java.home}\lib\deployment.config

Solaris, Linux

  • /etc/.java/deployment/deployment.config

  • ${deployment.java.home}/lib/deployment.config

OS X

  • /Library/Application Support/Oracle/Java/Deployment/deployment.config

  • ${deployment.java.home}/lib/deploy/deployment.config


${deployment.java.home} is the location of the JRE from which the deployment products are run. Deployment products include Java Web Start, Java Plug-in, Java Control Panel, and others.

The deployment.config file contains two properties: deployment.system.config and deployment.system.config.mandatory.

The deployment.system.config property is the URL to the system (enterprise-wide) deployment.properties file. This property can be used by system administrators to centrally administer or "lock-down" user-specific configuration settings. For local files, use the file protocol in the URL, for example, file:///C:/Windows/Sun/Java/Deployment/deployment.properties.


Note:

If the format for the file protocol that is shown in the example does not work for you, try one of the following alternative formats:
  • file\:\\C\:\\deployment.system.properties
  • file:\\C:\\deployment.system.properties
  • file://\\C:\\deployment.system.properties
  • file:/C:/deployment.system.properties

The deployment.system.config.mandatory property is a boolean. If set to true, the deployment.properties file that is pointed to by the deployment.system.config property must be found and successfully loaded, otherwise, nothing is allowed to run. If the property is set to false, an attempt is made to find and load the deployment. properties file that is pointed to by the deployment.system.config property. If successful, the file is used, otherwise, the file is ignored. The default for the deployment.system.config.mandatory property is false.

21.2 Deployment Configuration Properties

The following tables describe the properties that can be set in the deployment.properties file.


Note:

Any system deployment property, for example SomeKey=SomeValue, can be locked by including another key, SomeKey.locked. The key SomeKey.locked does not require a value, when the key is present, the property SomeKey=SomeValue is locked so that the user cannot change it. If a system deployment property is not locked, then a user is allowed to change it.

21.2.1 Infrastructure

Table 21-3 Configuration Properties Related to Infrastructure

Property Key Type Default Value Description

deployment.user.cachedir

String

$USER_HOME + File.separator + cache

User-level cache directory.

deployment.system.cachedir

String

null

System-level cache directory.

deployment.user.logdir

String

$USER_HOME + File.separator + log

User-level log directory.


21.2.2 Certificate stores and policy files

Table 21-4 Configuration Properties Related to Certificate Stores and Policy Files

Property Key Type Default Value Description

deployment.user.security.trusted.cacerts

String

$USER_HOME + File.separator + security + File.separator + trusted.cacerts;

User-level Root CA certificate store.

deployment.user.security.trusted.jssecacerts

String

$USER_HOME + File.separator + security + File.separator + trusted.jssecacerts

User-level JSSE CA certificate store.

deployment.user.security.trusted.certs

String

$USER_HOME + File.separator + security + File.separator + trusted.certs

User-level Trusted signer certificate store.

deployment.user.security.trusted.jssecerts

String

$USER_HOME + File.separator + security + File.separator + trusted.jssecerts;

User-level Trusted JSSE certificate store.

deployment.user.security.trusted.clientauthcerts

String

$USER_HOME + File.separator + security + File.separator + trusted.clientcerts

User-level Client Authentication certificate store.

deployment.user.security.exception.sites

String

$USER_HOME + File.separator + security + File.separator + exception.sites

Location of the exception site list. See Chapter 29, "Exception Site List" for information.

deployment.system.security.policy

String

null

System-level security policy file. The protocol of URL is either file, HTTP, or HTTPS.

deployment.system.security.cacerts

String

$JAVA_HOME + File.separator + lib + File.separator + security + File.separator + cacerts

System-level Root CA certificate store.

deployment.system.security.jssecacerts

String

$JAVA_HOME + File.separator + lib + File.separator + security + File.separator + jssecacerts;

System-level JSSE CA certificate store.

deployment.system.security.trusted.certs

String

$SYSTEM_HOME + File.separator + security + File.separator + trusted.certs

System-level Signer certificate store.

deployment.system.security.trusted.jssecerts

String

$SYSTEM_HOME + File.separator + security + File.separator + trusted.jssecerts

System-level JSSE certificate store.

deployment.system.security.trusted.clientauthcerts

String

$SYSTEM_HOME + File.separator + security + File.separator + trusted.clientcerts

System-level Client Authentication certificate store.


21.2.3 Security Access And Control Settings

Table 21-5 Configuration Properties Related to Security Access and Control

Property Key Type Default Value Description

deployment.security.level

String

HIGH

Security level setting. The following values are valid:

  • HIGH: Applications that are signed with a valid certificate and include the Permissions attribute in the manifest for the main JAR file are allowed to run with security prompts. Applications are also allowed to run with security prompts when the revocation status of the certificate cannot be checked. All other applications are blocked.

  • VERY_HIGH: Applications that are signed with a valid certificate and include the Permissions attribute in the manifest for the main JAR file are allowed to run with security prompts. All other applications are blocked.

deployment.webjava.enabled

Boolean

true

Set to true to run applets or Java Web Start (JWS) applications. Set to false to block applets and JWS applications from running.

deployment.insecure.jres

String

PROMPT

Setting for insecure JRE prompt. The following values are valid:

  • NEVER: Untrusted content always runs with the default JRE.

  • PROMPT: Users are prompted before using insecure JRE versions, and are shown warning dialogs

deployment.expiration.check.enabled

Boolean

true

Set to true to prompt users to update the JRE when an out-of-date JRE is found on their system. Set to false to suppress the prompt.

Note: To ensure that the expiration check is disabled, use the -userConfig deployment.expiration.check.enabled false option with the javaws command. If this property is changed in the deployment.properties file, open the Java Control Panel before starting an application to ensure that the native cache is synchronized with the file. Otherwise, the change might be ignored the first time an application is started.

deployment.security.askgrantdialog.show

Boolean

true

Set to true to allow users to grant permissions to applets and JWS applications. Set to false to block users from granting permissions.

deployment.security.askgrantdialog.notinca

Boolean

true

Set to true to allow users to grant permissions to certificates that are not issued by a CA in the Root/JSSE CA certificate store. Set to false to block users from granting permissions.

deployment.security.jsse.hostmismatch.warning

Boolean

true

Set to true to enable JSSE HTTPS certificate verification to show host-mismatch warnings. Set to false to suppress the warnings.

deployment.security.trusted.policy

String

""

Policy file that contains the ceiling policy of permissions granted to trusted applications and applets. The default is all permissions. Use this property to configure a lesser set of permissions.

deployment.security.mixcode

String

ENABLE

Setting for mixed mode. The following values are valid:

  • ENABLE: Enables the software to test for mixing trusted and untrusted code and, when potentially unsafe components are detected, raises a warning dialog.

  • HIDE_RUN: Suppresses the warning dialog and, if potentially unsafe components are detected, behaves as if the user had clicked Run in the warning dialog - the applet or application continues running with some added protections.

  • HIDE_CANCEL: Suppresses the warning dialog and behaves as if the user had clicked Cancel in the warning dialog - potentially unsafe components are blocked from running and the program may terminate.

  • DISABLE (not recommended): Disables the software from checking for mixing trusted and untrusted code, leaving the user to run potentially unsafe code with no warning and without the additional protections.

deployment.security.sandbox.awtwarningwindow

Boolean

true

true if the sandbox has awtShowWindowWithoutWarning.

deployment.security.sandbox.jnlp.enhanced

Boolean

true

Set to true to prompt the user to accept the JNLP API security dialogs.

deployment.security.sandbox.selfsigned

String

PROMPT

Setting for the prompt to run self-signed code in the sandbox. The following values are valid:

  • PROMPT: Prompt user to allow the self-signed app to run in the sandbox.

  • NEVER: Block all self-signed content.

deployment.security.sandbox.casigned

String

PROMPT

Setting to enable users to turn off future prompts for a signed app running in the sandbox. The following values are valid:

  • PROMPT: Prompt user to allow the app to run and provide information on the certificate used to sign the app. The user can choose to turn off future prompting for this application.

  • NEVER: Block any content from running unless it asks for and is granted all permissions.

deployment.security.blacklist.check

Boolean

true

Support for blacklisting signed JAR files that contain serious security vulnerabilities. This property is used to toggle this behavior. For more information see Blacklist Feature.

deployment.security.revocation.check

String

ALL_CERTIFICATES

Setting for revocation checks. The following values are valid:

  • PUBLISHER_ONLY: Checks only the certificate that the publisher used to sign the application.

  • ALL_CERTIFICATES: Checks all certificates in the certificate chain.

  • NO_CHECK (not recommended): Suppresses the check for certificates that have been revoked.

deployment.security.validation.ocsp

Boolean

true

Specifies whether Online Certificate Status Protocol is enabled.

deployment.security.validation.ocsp.url

String

null

Specifies a URL string pointing to an OCSP response server.

deployment.security.validation.ocsp.signer

String

null

Points to a OCSP response signer certificate subject name.

deployment.security.validation.crl

Boolean

true

Specifies whether to use certificate revocation list.

deployment.security.validation.crl.url

String

null

Specifies a URL in the Certificate Revocation List to perform a certificate validation.

deployment.security.validation.clockskew

int

900

Acceptable time difference, in seconds, between the system clock and the clock on the server used for revocation checks. If the property is not set, or the value is negative, the default of 900 seconds (15 minutes) is used.

deployment.security.validation.timeout

int

15

Maximum time, in seconds, that the system attempts to connect to the server for revocation checks before timing out. If the property is not set, or the value is negative, the default of 15 seconds is used. To never time out, set the property to 0.

deployment.security.authenticator

Boolean

true

Normally Plug-in and Web Start install an Authenticator to handle communication with Authenticating web pages or Authenticating proxies. This is the default behavior (true). This option can be used to turn the normal behavior off if, for example, an application communicates directly with an authenticating web page and needs to install its own Authenticator.


21.2.4 Networking

Table 21-6 Configuration Properties Related to Networking

Property Key Type Default Value Description

deployment.proxy.type

int

3 for PROX_TYPE_BROWSER

Type of proxy that should be used. The following values are valid:

  • PROX_TYPE_UNKNOWN = -1;

  • PROX_TYPE_NONE = 0;

  • PROX_TYPE_MANUAL = 1;

  • PROX_TYPE_AUTO = 2;

  • PROX_TYPE_BROWSER = 3;

deployment.proxy.same

Boolean

false

Set to true to use the same web server and port for https and ftp as is configured for http. This is only valid if deployment.proxy.type = PROX_TYPE_MANUAL.

deployment.proxy.auto.config.url

String

(no default)

URL for auto-Auto proxy configuration JavaScript.proxy configuration JavaScript.

deployment.proxy.bypass.list

String

(no default)

List of host names that should bypass the proxy. Each host name is delimited by a comma in the property, for example, 192.168.1.100,localhost,example.com

deployment.proxy.bypass.local

String

(no default)

All local hosts should be bypassed.

deployment.proxy.http.host

String

(no default)

HTTP proxy host name.

deployment.proxy.http.port

String

(no default)

HTTP proxy port.

deployment.proxy.https.host

String

(no default)

HTTPS proxy host name.

deployment.proxy.https.port

String

(no default)

HTTPS proxy port.

deployment.proxy.ftp.host

String

(no default)

FTP proxy host name.

deployment.proxy.ftp.port

String

(no default)

FTP proxy port.

deployment.proxy.socks.host

String

(no default)

SOCKS v4 proxy host name.

deployment.proxy.socks.port

String

(no default)

SOCKS v4 proxy port.

deployment.proxy.override.hosts

String

""

Proxy overridden list.


21.2.5 Cache and Optional Package Repository

Table 21-7 Configuration Properties Related to Cache and Optional Package Repository

Property Key Type Default Value Description

deployment.cache.max.size

int

-1

Maximum size of the deployment cache in megabytes (MB). This is the cache size for each cache: Java Web Start and Java Plug-in.

0: Disables caching in Java Plug-in; cache size in Java Web Start will be unlimited.

-1: Indicates unlimited cache size.

deployment.cache.jarcompression

String

0

0-9 compression ratio to use in applet JAR compression.

deployment.javapi.cache.enabled

Boolean

false

Specifies if the cache should be disabled. Set to false to prevent the cache from being disabled.


21.2.6 Java Console

Table 21-8 Configuration Properties Related to the Java Console

Property Key Type Default Value Description

deployment.console.startup.mode

String

HIDE

The following values are valid:

  • HIDE: Hide the Java Console;

  • SHOW: Show the Java Console;

  • DISABLE: Disable the Java Console;


21.2.7 Tracing and Logging

Table 21-9 Configuration Properties Related to Tracing and Logging

Property Key Type Default Value Description

deployment.trace

Boolean

false

Set to true to enable tracing.

deployment.log

Boolean

false

Set to true to enable logging.


21.2.8 Java Web Start

Table 21-10 Configuration Properties Related to Java Web Start

Property Key Type Default Value Description

deployment.javaws.associations

int

2

JNLP associations. The following values are valid:

  • ASSOCIATION_NEVER = 0;

  • ASSOCIATION_NEW_ONLY = 1;

  • ASSOCIATION_ASK_USER = 2;

  • ASSOCIATION_REPLACE_ASK = 3;

deployment.javaws.shortcut

String

ASK_IF_HINTED

Create a desktop shortcut for Java Web Start. The following values are valid:

  • NEVER

  • ALWAYS

  • ASK_USER

  • ASK_IF_HINTED

  • ALWAYS_IF_HINTED


21.2.9 Browser Selection and Path

Table 21-11 Configuration Properties Related to Browser Selection and Path

Property Key Type Default Value Description

deployment.browser.path

String

<No Browser Selected>

Path to the browser for showing web pages from the application viewer, the About Box, and Java Web Start applications.

Note that this property is used for Solaris and Linux only. On Windows, this property is ignored, and the default browser is determined in the same way as other applications that launches a browser on Windows.


21.2.10 Check for update Timeout

Table 21-12 Configuration Properties Related to Update Timeout

Property Key Type Default Value Description

deployment.javaws.update.timeout

int

500

Units are milliseconds.


21.2.11 SSLv3 is disabled by default

It should be noted that SSLv3 is obsolete and should no longer be used. See https://blogs.oracle.com/security/entry/information_about_ssl_poodle_vulnerability. Starting with JDK 8u31 release, the SSLv3 protocol (Secure Socket Layer) has been deactivated and is not available by default.

If the user needs to use SSLv3 for applications, see the procedure to re-enable SSLv3 at http://docs.oracle.com/javase/8/docs/technotes/guides/security//SunProviders.html#enable-sslv3.

More information about how to configure specific protocols can be found at:

http://www.oracle.com/technetwork/java/javase/documentation/cve-2014-3566-2342133.html

Contents Previous Next

Oracle and/or its affiliates Copyright © 1993, 2018, Oracle and/or its affiliates. All rights reserved.
Contact Us