/*
 * SPDX-FileCopyrightText: 2015-2025 Espressif Systems (Shanghai) CO LTD
 *
 * SPDX-License-Identifier: Apache-2.0
 */

#include <stdio.h>
#include <string.h>
#include "freertos/FreeRTOS.h"
#include "freertos/semphr.h"
#include "freertos/task.h"
#include "soc/usb_wrap_struct.h"
#include "esp_intr_alloc.h"
#include "esp_err.h"
#include "esp_attr.h"
#include "esp_rom_gpio.h"
#include "usb_private.h"
#include "usb/usb_types_ch9.h"
#include "esp_private/usb_phy.h"
#include "hcd_common.h"
#include "mock_msc.h"
#include "phy_common.h"
#include "unity.h"
#include "sdkconfig.h"

// ----------------------------------------------------- Macros --------------------------------------------------------

#define TEST_P4_OTG11 0 // Change this to 1 to test on OTG1.1 peripheral - only for ESP32-P4

// --------------------- Constants -------------------------

#if TEST_P4_OTG11
#define TEST_PHY                USB_PHY_TARGET_INT
#define TEST_PERIPHERAL_MAP     BIT1
#define TEST_PORT_NUM           1
#else
#if CONFIG_IDF_TARGET_ESP32P4
#define TEST_PHY                USB_PHY_TARGET_UTMI
#else
#define TEST_PHY                USB_PHY_TARGET_INT
#endif
#define TEST_PERIPHERAL_MAP     BIT0
#define TEST_PORT_NUM           0
#endif // TEST_P4_OTG11

#define EVENT_QUEUE_LEN         5
#define ENUM_ADDR               1   // Device address to use for tests that enumerate the device
#define ENUM_CONFIG             1   // Device configuration number to use for tests that enumerate the device

typedef struct {
    hcd_port_handle_t port_hdl;
    hcd_port_event_t port_event;
} port_event_msg_t;

typedef struct {
    hcd_pipe_handle_t pipe_hdl;
    hcd_pipe_event_t pipe_event;
} pipe_event_msg_t;

hcd_port_handle_t port_hdl = NULL;

// ---------------------------------------------------- Private --------------------------------------------------------

/**
 * @brief HCD port callback. Registered when initializing an HCD port
 *
 * @param port_hdl Port handle
 * @param port_event Port event that triggered the callback
 * @param user_arg User argument
 * @param in_isr Whether callback was called in an ISR context
 * @return true ISR should yield after this callback returns
 * @return false No yield required (non-ISR context calls should always return false)
 */
static bool port_callback(hcd_port_handle_t port_hdl, hcd_port_event_t port_event, void *user_arg, bool in_isr)
{
    // We store the port's queue handle in the port's context variable
    void *port_ctx = hcd_port_get_context(port_hdl);
    QueueHandle_t port_evt_queue = (QueueHandle_t)port_ctx;
    TEST_ASSERT_TRUE(in_isr);    // Current HCD implementation should never call a port callback in a task context
    port_event_msg_t msg = {
        .port_hdl = port_hdl,
        .port_event = port_event,
    };
    BaseType_t xTaskWoken = pdFALSE;
    xQueueSendFromISR(port_evt_queue, &msg, &xTaskWoken);
    return (xTaskWoken == pdTRUE);
}

/**
 * @brief HCD pipe callback. Registered when allocating a HCD pipe
 *
 * @param pipe_hdl Pipe handle
 * @param pipe_event Pipe event that triggered the callback
 * @param user_arg User argument
 * @param in_isr Whether the callback was called in an ISR context
 * @return true ISR should yield after this callback returns
 * @return false No yield required (non-ISR context calls should always return false)
 */
static bool pipe_callback(hcd_pipe_handle_t pipe_hdl, hcd_pipe_event_t pipe_event, void *user_arg, bool in_isr)
{
    QueueHandle_t pipe_evt_queue = (QueueHandle_t)user_arg;
    pipe_event_msg_t msg = {
        .pipe_hdl = pipe_hdl,
        .pipe_event = pipe_event,
    };
    if (in_isr) {
        BaseType_t xTaskWoken = pdFALSE;
        xQueueSendFromISR(pipe_evt_queue, &msg, &xTaskWoken);
        return (xTaskWoken == pdTRUE);
    } else {
        xQueueSend(pipe_evt_queue, &msg, portMAX_DELAY);
        return false;
    }
}

// ------------------------------------------------- HCD Event Test ----------------------------------------------------

void test_hcd_expect_port_event(hcd_port_handle_t port_hdl, hcd_port_event_t expected_event)
{
    // Get the port event queue from the port's context variable
    QueueHandle_t port_evt_queue = (QueueHandle_t)hcd_port_get_context(port_hdl);
    TEST_ASSERT_NOT_NULL(port_evt_queue);
    // Wait for port callback to send an event message
    port_event_msg_t msg;
    BaseType_t ret = xQueueReceive(port_evt_queue, &msg, pdMS_TO_TICKS(5000));
    TEST_ASSERT_EQUAL_MESSAGE(pdPASS, ret, "Port event not generated on time");
    // Check the contents of that event message
    TEST_ASSERT_EQUAL(port_hdl, msg.port_hdl);
    TEST_ASSERT_EQUAL_MESSAGE(expected_event, msg.port_event, "Unexpected event");
    printf("\t-> Port event\n");
}

void test_hcd_expect_pipe_event(hcd_pipe_handle_t pipe_hdl, hcd_pipe_event_t expected_event)
{
    // Get the pipe's event queue from the pipe's context variable
    QueueHandle_t pipe_evt_queue = (QueueHandle_t)hcd_pipe_get_context(pipe_hdl);
    TEST_ASSERT_NOT_NULL(pipe_evt_queue);
    // Wait for pipe callback to send an event message
    pipe_event_msg_t msg;
    BaseType_t ret =  xQueueReceive(pipe_evt_queue, &msg, pdMS_TO_TICKS(5000));
    TEST_ASSERT_EQUAL_MESSAGE(pdPASS, ret, "Pipe event not generated on time");
    // Check the contents of that event message
    TEST_ASSERT_EQUAL(pipe_hdl, msg.pipe_hdl);
    TEST_ASSERT_EQUAL_MESSAGE(expected_event, msg.pipe_event, "Unexpected event");
}

int test_hcd_get_num_port_events(hcd_port_handle_t port_hdl)
{
    // Get the port event queue from the port's context variable
    QueueHandle_t port_evt_queue = (QueueHandle_t)hcd_port_get_context(port_hdl);
    TEST_ASSERT_NOT_NULL(port_evt_queue);
    return EVENT_QUEUE_LEN - uxQueueSpacesAvailable(port_evt_queue);
}

int test_hcd_get_num_pipe_events(hcd_pipe_handle_t pipe_hdl)
{
    // Get the pipe's event queue from the pipe's context variable
    QueueHandle_t pipe_evt_queue = (QueueHandle_t)hcd_pipe_get_context(pipe_hdl);
    TEST_ASSERT_NOT_NULL(pipe_evt_queue);
    return EVENT_QUEUE_LEN - uxQueueSpacesAvailable(pipe_evt_queue);
}

// ----------------------------------------------- Driver/Port Related -------------------------------------------------

hcd_port_handle_t test_hcd_setup(void)
{
    test_setup_usb_phy(TEST_PHY);

    // Create a queue for port callback to queue up port events
    QueueHandle_t port_evt_queue = xQueueCreate(EVENT_QUEUE_LEN, sizeof(port_event_msg_t));
    TEST_ASSERT_NOT_NULL(port_evt_queue);
    // Install HCD
    hcd_config_t hcd_config = {
        .intr_flags = ESP_INTR_FLAG_LEVEL1,
        .peripheral_map = TEST_PERIPHERAL_MAP,
    };
    TEST_ASSERT_EQUAL(ESP_OK, hcd_install(&hcd_config));
    // Initialize a port
    hcd_port_config_t port_config = {
        .callback = port_callback,
        .callback_arg = (void *)port_evt_queue,
        .context = (void *)port_evt_queue,
    };
    hcd_port_handle_t port_hdl;
    TEST_ASSERT_EQUAL(ESP_OK, hcd_port_init(TEST_PORT_NUM, &port_config, &port_hdl));
    TEST_ASSERT_NOT_NULL(port_hdl);
    return port_hdl;
}

void test_hcd_teardown(hcd_port_handle_t port_hdl)
{
    if (!port_hdl) {
        return; // In case of setup stage failure, don't run tear-down stage
    }
    // Get the queue handle from the port's context variable
    QueueHandle_t port_evt_queue = (QueueHandle_t)hcd_port_get_context(port_hdl);
    TEST_ASSERT_NOT_NULL(port_evt_queue);
    // Deinitialize a port
    TEST_ASSERT_EQUAL(ESP_OK, hcd_port_deinit(port_hdl));
    // Uninstall the HCD
    TEST_ASSERT_EQUAL(ESP_OK, hcd_uninstall());
    vQueueDelete(port_evt_queue);
    // Deinitialize the internal USB PHY
    test_delete_usb_phy();
}

usb_speed_t test_hcd_wait_for_conn(hcd_port_handle_t port_hdl)
{
    // Power ON the port. This should allow for connections to occur
    TEST_ASSERT_EQUAL(ESP_OK, hcd_port_command(port_hdl, HCD_PORT_CMD_POWER_ON));
    TEST_ASSERT_EQUAL(HCD_PORT_STATE_DISCONNECTED, hcd_port_get_state(port_hdl));
    // Wait for connection event
    printf("Waiting for connection\n");
    test_hcd_expect_port_event(port_hdl, HCD_PORT_EVENT_CONNECTION);
    TEST_ASSERT_EQUAL(HCD_PORT_EVENT_CONNECTION, hcd_port_handle_event(port_hdl));
    TEST_ASSERT_EQUAL(HCD_PORT_STATE_DISABLED, hcd_port_get_state(port_hdl));
    // Reset newly connected device
    printf("Resetting\n");
    TEST_ASSERT_EQUAL(ESP_OK, hcd_port_command(port_hdl, HCD_PORT_CMD_RESET));
    TEST_ASSERT_EQUAL(HCD_PORT_STATE_ENABLED, hcd_port_get_state(port_hdl));
    // Get speed of connected
    usb_speed_t port_speed;
    TEST_ASSERT_EQUAL(ESP_OK, hcd_port_get_speed(port_hdl, &port_speed));
    TEST_ASSERT_LESS_OR_EQUAL_MESSAGE(USB_SPEED_HIGH, port_speed, "Invalid port speed");
    printf("%s speed enabled\n", (char *[]) {
        "Low", "Full", "High"
    }[port_speed]);
    return port_speed;
}

void test_hcd_wait_for_disconn(hcd_port_handle_t port_hdl, bool already_disabled)
{
    if (!already_disabled) {
        // Disable the device
        printf("Disabling\n");
        TEST_ASSERT_EQUAL(ESP_OK, hcd_port_command(port_hdl, HCD_PORT_CMD_DISABLE));
        TEST_ASSERT_EQUAL(HCD_PORT_STATE_DISABLED, hcd_port_get_state(port_hdl));
    }
    printf("Waiting for disconnection\n");
    // Power-off the port to trigger a disconnection
    TEST_ASSERT_EQUAL(ESP_OK, hcd_port_command(port_hdl, HCD_PORT_CMD_POWER_OFF));
    // Wait for the port disconnection event
    test_hcd_expect_port_event(port_hdl, HCD_PORT_EVENT_DISCONNECTION);
    TEST_ASSERT_EQUAL(HCD_PORT_EVENT_DISCONNECTION, hcd_port_handle_event(port_hdl));
    TEST_ASSERT_EQUAL(HCD_PORT_STATE_RECOVERY, hcd_port_get_state(port_hdl));
    // Power down the port
    TEST_ASSERT_EQUAL(ESP_OK, hcd_port_command(port_hdl, HCD_PORT_CMD_POWER_OFF));
    TEST_ASSERT_EQUAL(HCD_PORT_STATE_NOT_POWERED, hcd_port_get_state(port_hdl));
}

// ---------------------------------------------- Pipe Setup/Tear-down -------------------------------------------------

hcd_pipe_handle_t test_hcd_pipe_alloc(hcd_port_handle_t port_hdl, const usb_ep_desc_t *ep_desc, uint8_t dev_addr, usb_speed_t dev_speed)
{
    // Create a queue for pipe callback to queue up pipe events
    QueueHandle_t pipe_evt_queue = xQueueCreate(EVENT_QUEUE_LEN, sizeof(pipe_event_msg_t));
    TEST_ASSERT_NOT_NULL(pipe_evt_queue);
    hcd_pipe_config_t pipe_config = {
        .callback = pipe_callback,
        .callback_arg = (void *)pipe_evt_queue,
        .context = (void *)pipe_evt_queue,
        .ep_desc = ep_desc,
        .dev_addr = dev_addr,
        .dev_speed = dev_speed,
    };
    hcd_pipe_handle_t pipe_hdl;
    TEST_ASSERT_EQUAL(ESP_OK, hcd_pipe_alloc(port_hdl, &pipe_config, &pipe_hdl));
    TEST_ASSERT_NOT_NULL(pipe_hdl);
    return pipe_hdl;
}

void test_hcd_pipe_free(hcd_pipe_handle_t pipe_hdl)
{
    // Get the pipe's event queue from its context variable
    QueueHandle_t pipe_evt_queue = (QueueHandle_t)hcd_pipe_get_context(pipe_hdl);
    TEST_ASSERT_NOT_NULL(pipe_evt_queue);
    // Free the pipe and queue
    TEST_ASSERT_EQUAL(ESP_OK, hcd_pipe_free(pipe_hdl));
    vQueueDelete(pipe_evt_queue);
}

#include "esp_private/esp_cache_private.h"

#define ALIGN_UP(num, align)    ((align) == 0 ? (num) : (((num) + ((align) - 1)) & ~((align) - 1)))

#ifdef CONFIG_USB_HOST_DWC_DMA_CAP_MEMORY_IN_PSRAM      // In esp32p4, the USB-DWC internal DMA can access external RAM
#define DATA_BUFFER_CAPS                     (MALLOC_CAP_DMA | MALLOC_CAP_CACHE_ALIGNED | MALLOC_CAP_SPIRAM)
#else
#define DATA_BUFFER_CAPS                     (MALLOC_CAP_DMA | MALLOC_CAP_CACHE_ALIGNED | MALLOC_CAP_INTERNAL)
#endif

urb_t *test_hcd_alloc_urb(int num_isoc_packets, size_t data_buffer_size)
{
    // Allocate a URB and data buffer
    urb_t *urb = heap_caps_calloc(1, sizeof(urb_t) + (sizeof(usb_isoc_packet_desc_t) * num_isoc_packets), MALLOC_CAP_DEFAULT);

    size_t cache_align = 0;
    esp_cache_get_alignment(DATA_BUFFER_CAPS, &cache_align);
    data_buffer_size = ALIGN_UP(data_buffer_size, cache_align);
    void *data_buffer = heap_caps_malloc(data_buffer_size, DATA_BUFFER_CAPS);

    TEST_ASSERT_NOT_NULL_MESSAGE(urb, "Failed to allocate URB");
    TEST_ASSERT_NOT_NULL_MESSAGE(data_buffer, "Failed to allocate transfer buffer");

    // Initialize URB and underlying transfer structure. Need to cast to dummy due to const fields
    usb_transfer_dummy_t *transfer_dummy = (usb_transfer_dummy_t *)&urb->transfer;
    transfer_dummy->data_buffer = data_buffer;
    transfer_dummy->data_buffer_size = data_buffer_size;
    transfer_dummy->num_isoc_packets = num_isoc_packets;
    return urb;
}

void test_hcd_free_urb(urb_t *urb)
{
    // Free data buffer of the transfer
    heap_caps_free(urb->transfer.data_buffer);
    // Free the URB
    heap_caps_free(urb);
}

uint8_t test_hcd_enum_device(hcd_pipe_handle_t default_pipe)
{
    // We need to create a URB for the enumeration control transfers
    urb_t *urb = test_hcd_alloc_urb(0, sizeof(usb_setup_packet_t) + 256);
    usb_setup_packet_t *setup_pkt = (usb_setup_packet_t *)urb->transfer.data_buffer;

    // Get the device descriptor (note that device might only return 8 bytes)
    USB_SETUP_PACKET_INIT_GET_DEVICE_DESC(setup_pkt);
    urb->transfer.num_bytes = sizeof(usb_setup_packet_t) + sizeof(usb_device_desc_t);
    TEST_ASSERT_EQUAL(ESP_OK, hcd_urb_enqueue(default_pipe, urb));
    test_hcd_expect_pipe_event(default_pipe, HCD_PIPE_EVENT_URB_DONE);
    TEST_ASSERT_EQUAL(urb, hcd_urb_dequeue(default_pipe));
    TEST_ASSERT_EQUAL_MESSAGE(USB_TRANSFER_STATUS_COMPLETED, urb->transfer.status, "Transfer NOT completed");

    // Update the MPS of the default pipe
    usb_device_desc_t *device_desc = (usb_device_desc_t *)(urb->transfer.data_buffer + sizeof(usb_setup_packet_t));
    TEST_ASSERT_EQUAL(ESP_OK, hcd_pipe_update_mps(default_pipe, device_desc->bMaxPacketSize0));

    // Send a set address request
    USB_SETUP_PACKET_INIT_SET_ADDR(setup_pkt, ENUM_ADDR);    // We only support one device for now so use address 1
    urb->transfer.num_bytes = sizeof(usb_setup_packet_t);
    TEST_ASSERT_EQUAL(ESP_OK, hcd_urb_enqueue(default_pipe, urb));
    test_hcd_expect_pipe_event(default_pipe, HCD_PIPE_EVENT_URB_DONE);
    TEST_ASSERT_EQUAL(urb, hcd_urb_dequeue(default_pipe));
    TEST_ASSERT_EQUAL_MESSAGE(USB_TRANSFER_STATUS_COMPLETED, urb->transfer.status, "Transfer NOT completed");

    // Update address of default pipe
    TEST_ASSERT_EQUAL(ESP_OK, hcd_pipe_update_dev_addr(default_pipe, ENUM_ADDR));

    // Some high-speed Hubs need some time before being able to process SetConfiguration request
    // Full-speed devices doesn't require that time
    vTaskDelay(pdMS_TO_TICKS(10));

    // Send a set configuration request
    USB_SETUP_PACKET_INIT_SET_CONFIG(setup_pkt, ENUM_CONFIG);
    urb->transfer.num_bytes = sizeof(usb_setup_packet_t);
    TEST_ASSERT_EQUAL(ESP_OK, hcd_urb_enqueue(default_pipe, urb));
    test_hcd_expect_pipe_event(default_pipe, HCD_PIPE_EVENT_URB_DONE);
    TEST_ASSERT_EQUAL(urb, hcd_urb_dequeue(default_pipe));
    TEST_ASSERT_EQUAL_MESSAGE(USB_TRANSFER_STATUS_COMPLETED, urb->transfer.status, "Transfer NOT completed");

    // Free URB
    test_hcd_free_urb(urb);
    return ENUM_ADDR;
}