Lab 2
In this lab you will be introduced to the Quartus and the Altera board in the lab.
Here are 2 tutorials one for verilog entry, and the other for schematic design. Print these 2 tutorials and perform the design and testing (both simulation and physical testing on the board) step by step in the lab.
This tutorial is for the new D2 lab, which we have not received yet. Instead use the UP2 board in the lab.
The chip in the UP2 board is not the chip in the DE2, the chip we have is EPM7128SLC84-7 and the board should be configured to use this chip. The TA (or me) will show you how to do this in the lab.